Apprion IONizer 4200 Series, Руководство по установке оборудования

Страница: 24 / 38

Chapter 5
– Cabling the IONizer
Page 16
Apprion Proprietary & Confidential
As shown, a 6-inch conduit tube is connected to the conduit opening on the IONizer. Both cables should
be routed through this tube.
A ¾-inch Conduit union is then connected to the 6-inch conduit tube. This union allows for easily
disconnection of the IONizer from the remainder of the conduit cabling.
A ¾-inch threaded conduit nub is used between the conduit union and the conduit housing. The conduit
housing is also designed for easy disconnection for the conduit cabling system. This housing contains
two RJ45 couplers. These couples are used to form a connection from the PoE source and the hardwired
WAN and LAN cables.
Using 48V PoE from an iKIT
The IONizer can also be connected to an Apprion iKIT which also supplies power and Ethernet. The iKIT
provides a convenient way to cable an IONizer especially in areas where power and network cabling is a
long distance from the IONizer. This method provides PoE but also provides surge and lightning
protection for data and power. See the appropriate
iKIT Installation Guide for complete iKIT details.