Apprion IONizer 4200 Series, Руководство по установке оборудования

Страница: 20 / 38

Chapter 4
– Mounting Methods
Page 12
Apprion Proprietary & Confidential
6. Seal antenna connections (see instructions).
Note: The IONizer 4020 contains an embedded WiHART gateway which requires its own antenna (P/N
89-1584-000). This antenna must be attached to antenna Port 3. The ports are silkscreened on the
IONizer casing.
Sealing Antenna Connections
Antenna connections should be sealed to protect them from exterior harsh environments. Use a self-
amalgamating poly isobutylene tape, which over a period of time adheres to itself and forms a single
amalgameted rubber molding that conforms to the shape of the item its covering. Once the tape is in
place for several hours, the rubber molding is resistant to water and most solvents. It remains stable
over a wide temperature range and degrades very slowly in sunlight. The tape can be removed by
cutting it away with a sharp knife.