CSPP Capacitor Charging Unit Operation Manual
CSP-CSPP-8000/2
_________________________________________________________________________________________________________
__________________________________________________________________________________________________________
Page
25
of
59
SECTION 2 - TROUBLESHOOTING
1. Introduction
The CSP-P Units have been designed so that the operator does not need to remove the top cover
for any usual adjustments. The top cover should only be removed by factory trained personnel, and
the following points should be noted.
The safety features have been over-engineered for safety, but should not be relied upon:-
An earth wand - connected to the front panel ground and ship ground should be used to
ensure any high voltage inside the unit is dissipated.
Call the factory for advice if you are unsure about anything!
An earth wand can be supplied if required.
