Appliance 365 Limited UEFM601SS, Инструкция по установке и эксплуатации

Страница: 17 / 22

In order to ensure adequate ventilation, the back panel of the housing unit must be removed. The preferred
method of installation is by means of two strips of wood on which the oven will sit (see fig A). If the oven rests
on a continuous, flat surface (fig B), there must be a ventilation gap at the rear of at least D40×W560mm.
Fig A Fig B
The panels of any adjacent cabinets must be made of heat-resistant material. In particular, cabinets with a
veneer exterior must be assembled with glues that can withstand temperatures up to 100
°
C.
In compliance with current safety standards, it must not be possible to make contact with the electrical parts of
the oven once it has been installed.
All parts, which ensure the safe operation of the appliance, must be removable only with the aid of a tool.
To fasten the oven to the cabinet, open the door of the oven and attach it by inserting 4 wood screws into the
holes located on the perimeter of the door frame.
Electrical Connection
All electrical work should be carried out by a suitably qualified engineer.
Before connecting the oven to the mains supply, ensure that:
•
The supply voltage corresponds to the specifications on the data plate on the front of the oven.
•
The mains lead should be a minimum of 1.5m long to ensure there is adequate length to connect to the
electrical supply once the oven is in place.
•
The mains supply has an efficient earth (ground) connection complying with all applicable laws and
regulations. Correct earthing (grounding) is a legal requirement. The power cable should never reach a
temperature of 50° C above ambient temperature at a ny point along its length.
•
If the appliance is to be connected directly to a mains terminal, fit a switch with minimum aperture of
3mm between the contacts making sure that the switch is of sufficient capacity for the power specified
on the appliance’s dataplate, and compliant with applicable regulations. The switch must not break the
560mm
40mm
40mm
600mm
600mm
560mm
600mm
554mm
595mm
595mm
522mm
542mm
21.5mm