12
DIP Switch Settings
Baud rate Setting SW2
(
B7~B8
)
Protocol Setting SW2
(
B1~B6
)
Remarks: “
○
”means OPEN status.
Switch Number
Protocol
FACTORY
PELCO-P
○
PELCO-D
○
Keep for
Update
37
enter the patrol number change setting and the parameter flicker.
5.
Up/down P/T to choose.
6.
Press
【
OPEN
】
for confirm, save and exit; press
【
CLOSE
】
exit
directly.
z
EDIT SEQUENCE
)
Operations:
1.
Call preset point 95 to enter main menu.
2.
Up/Down cursor to choose
【
PANTILT SETTING
】
, press
【
OPEN
】
for confirm and enter pan set menu.
3.
Under
【
PANTILT SETTING
】
choose
【
EDIT SEQUENCE
】
and press
【
OPEN
】
for confirm, the ‘preset point-stay’ will be showed on
the screen.
4.
Up/down P/T for setting the current parameter and the parameter
flicker.
5.
Press
【
OPEN
】
for confirm, save and exit; press
【
CLOSE
】
exit
directly.
Instruction
:
Every group of parameters is form of two groups of numbers, the
first represent preset point number and the second for staying time. The
staying time for every preset point is decided by the default time when it
is not changed. The users could also set the staying time of every preset
point through current menu. Every patrol could set 32 preset points at
most.
PATTERN SETUP
The dome camera recording 1000 different actions continuously could be realized,
including pan control, routine control of the camera etc. The machine will move
according to the recorded running track. 4 mode functions can be set.
PANTILT SETTING PATTERN SETUP
【
PANTILT SETTING
】
【
PRESETS SETUP
】
【
SEQUENCE SETUP
】
→
【
PATTERN SETUP
】
【
AUTOSCAN SETUP
】
【
HOME ACTION
】
→
PATTERN NUMBER
TITLE
RECORD NEW PATTERN
RUN CONTINUOUSLY
DELETE CURRENT