16
2. Line Connect Instruction:
Control line mark as picture 7.
Picture 7
Check the control cable, video cable and power cable connected in accordance with
the signals before the electricity to work the ball machine
（
as picture8
）
Attention
：
Lines should connect strictly obey the chart!
Picture 8
Color Instruction
DC IN
DC12V
Orange Earth
line
Yellow RS485+(A)
Green RS485-(B)
33
auto-aperture while using auto-focus or auto-aperture, with only using
the rocker.
Focus
：
After choosing this item, it will just return to auto-focus mode while
using manual-focus or manual-aperture, with only using the rocker.
Aperture
：
After choosing this item, it will just return to auto-aperture mode
while using manual-focus or manual-aperture, with only using the
rocker.
)
Operations
：
1.
Call preset point 95 to enter main
menu.
2.
Under
【
PANTILT SETTING
】
choose
【
PANTILT SETTING
】
menu,
press
【
OPEN
】
for confirm and enter pan parameter set.
3.
Under
【
PANTILT SETTING
】
choose
【
JOYSTICK RECOVER
】
menu, press
【
OPEN
】
for confirm and enter rocker recovery set.
4.
Up/down P/T to change.
5.
Press
【
OPEN
】
key, save and exit; press
【
CLOSE
】
key, exit directly.
z
SPEED PROPORTIONAL
When in manual –adjusting mode, for the focal length is rather far, the picture
may move quickly if you just touch the rocker lightly due to the fast mile response
of the dome camera, which will cause image losing, and the pictures may easy to
shake when watch the nearer pictures.
When the Speed Matching is open, the speed of the pan will change in
proportion to the camera lens. The larger the amplification of the camera lens, the
slower the speed of the pan. Thus could keep the picture stay clear. When it reaches
the largest value, the speed of the pan will be 0.1°/s.
)
Operations
：
1.
Call preset point 95 to enter main menu
2.
Under
【
PANTILT SETTING
】
choose
【
PANTILT SETTING
】
menu,
press
【
OPEN
】
for confirm and enter pan parameter set.
3.
Under
【
PANTILT SETTING
】
choose
【
SPEED PROPORTIONAL
】
menu, press
【
OPEN
】
for confirm and enter speed matching set.
4.
Up/down P/T to open or close this function.
5.
Press
【
OPEN
】
key, save and exit; press
【
CLOSE
】
key, exit directly.
