Apollo SA7800-870APO, Руководство пользователя

Страница: 24 / 50

MANAGEMENT
SYSTEMS
Assessed to ISO 9001:2008
Cert/LPCB ref. 010
Assessed to ISO 14001:2004
Cert/LPCB ref. 010 EMS
MANAGEMENT
SYSTEMS
Cert/LPCB ref. 010
PRODUCT
CERTIFICATION
Apollo Test Set - User Manual
24
Data log
This menu gives a list of all events on the loop. This can range from mismatched data through to the current device
status. When you select the data log menu the unit starts recording data logs for each individual address. Changes on
each address are shown by different colours.
Occupied
address
Empty
address
Dual address
Mismatched
data
Event flag at
this address
Swipe right from the left side of
the screen. The menu selection bar
appears.
Tap ‘Data Log’. The menu selection bar
closes and the Data Log screen appears.
Tap on the address that you want to see
the data log. The data log splash screen
appears,
Parameter Description
Address polled device
Device type
encoded (device type test set ID) and match (  ) /mismatched ( X ) if current device type does not match initial one,
counter value will increase)
Address confirmation match (

)/mismatched ( X ) - if current address confirmation does not match initial one, counter value will increase
O/P bits current status - abbreviations for output bit names - if they are set
I/P bits
match (  )/mismatched ( X ) - if current I/P bit status does not match initial one, counter value will increase
Analogue value min/max/last
Drift flag match (  )/mismatched ( X )
Events flag event flags and event address (e.g. I,1 - device at the address 1 placed interrupt bit) - if any event flag is set, counter
value will increase
Parity correct (

)/incorrect ( X )
Power-up flag
match (  )/mismatched ( X ) - Soteria devices only, blank for all other devices
Checksum correct (  )/incorrect ( X ) - Soteria devices only, blank for all other devices