10
3. ASSEMBLY AND OPERATION
·
The bed is supplied disassembled.
·
The bed is assembled on location by the retailer’s personnel.
·
The installation must be carried out by a minimum of two persons.
Packaging units:
Carton 1: Back rest section of mattress platform complete with actuator, side rail end
caps, mattress retainers and mattress platform connecting bars.
Carton 2: Leg rest section of mattress platform complete with actuator, main
electrical control unit and hand control unit.
Carton 3: Headboard Bed end (shorter connecting bars) with a Hi-Lo actuator.
Carton 4: Footboard Bed end (longer connecting bars for extending purposes) with
a Hi-Lo actuator.
Carton 5: Six wood effect aluminium bars to form the bed side rails.
3.1 Assembly
Mounting instructions:
·
The assembly of the bed must be carried out by a minimum of two persons;
Unscrew the 8 hand screws on both the head and foot halves of the frame. Use the bars
provided to connect the two halves of the frame together, ensuring the end of each bar
with the blue dot is inserted first into the fame with the matching blue dots. Also note the
location holes for the hand screws need to be on the bottom of the connecter bars as
shown in the photo above right. Once the two halves of the frame are fully pushed
together, hand tighten all the hand screws.
Unscrew the 4 hand screws on both ends of the
frame and swing the headboard / footboard
connecting bars outwards 90 degrees to align with
the main bed frame. The footboard is provided
with longer connecting bars in order to enable the
bed to be extended. Fully insert the bars into the
frame and hand tighten all the hand screws.