13
SEPARATOR (FIGURE 4)
The separator (1) is mounted inside the cover (2). The dust collector is connected to the hose connector (3) and generates the appropriate airflow
within the separator to separate the dust from the shot. The dust flows to the dust collector, while the shot passes through the removable mesh
tray (4) and drops back into the hopper (5). The mesh tray prevents coarse contaminants from getting to the blast wheel.
SHOT VALVE (FIGURES 5-6)
The shot valve (1) regulates the flow of shot to the blast wheel and is located between the hopper (2) and the feed spout (3). The valve is con
-
trolled by the shot control lever (4) via the control cable (5). Maximum feed occurs with the lever completely open. The shop valve stop (6) sets
the maximum opening of the shot valve.
Components and Assembly
13
FIG. 4
FIG. 6
FIG. 5
2
2
5
6
3
3
1
1
4
5
4
Close
Open
402306_A95_RevH
Содержание A95
Страница 3: ...Table of Contents 3 Labels 48 Wiring Diagrams 49 Handle 49 Blast Motor 50 402306_A95_RevH ...
Страница 51: ......