AH-New
condensing air handling unit
APEN GROUP SPA reserves the right to make changes deemed to be required to its products or documentation
8
code HG0310.05GB ed.A-2010
AH
9
code HG0310.05GB ed.A-2010
AH
INFORMATION FOR DISPOSAL valid abroad (EU COUNTRIES
except Italy).
The European Directive 2012/19/EC shall be implemented in
every EU member state. There may be different application
modalities for the various member states, even in terms of
modality for waste disposal depending on its type (House-hold
or Professional WEEE). To this regard at the end of the life of
the product, we highly recommend you call the distributor or
installer so as to obtain information on the correct disposal, in
compliance with the existing laws of the installation country.
2.9.
Unpacking
The unpacking operation must be carried out by using suitable
tools or safety devices where required. Recovered packaging
materials must be separated and disposed of according to
applicable regulations in the country of use.
While unpacking the unit, check that the unit and all its parts
have not been damaged during transport and match the order.
If damages have occurred or parts are found to be missing,
immediately contact the supplier.
The manufacturer is not liable for any damages occurred
during transport, handling and unloading.
Packing material disposal
The packing safeguards the product from transport damages.
All the materials used are environmentally friendly and
recyclable. Please contact a specialised distributor or your local
administration for more information on waste disposal.
2.10. Dismantling and demolition
Should the machine be dismantled or demolished, the person
in charge with the operation shall proceed as follows:
Disposal of end-of-life products
This equipment is marked in compliance with
European Directive 2012/19/EU on waste electrical
and electronic equipment (WEEE). This Directive
defines the rules for collecting and recycling waste
equipments throughout the entire territory of the
European Union.
WEEE contains both pollutants (that can negatively
affect the environment) and raw materials (that can be reused).
IT
is therefore necessary to subject WEEE to appropriate
treatments, in order to remove and safely dispose of pollutants
and to extract and recycle raw materials. IT
is forbidden to
dispose of WEEE as unsorted waste. These operations facilitate
recovery and recycling of the materials, thus reducing the
environmental impact.
NOTE: All materials recovered will be processed and
disposed of according to what provided for by the laws
in force in the country of use and/or according to the
standards indicated in the safety sheets of the chemicals.
INFORMATION FOR DISPOSAL valid in ITALY (Legislative
Decree 49/2014)
The AH series air handling units and relating accessories are
considered “professional WEEE - waste electrical and electronic
equipment”. According to the legislation in force in Italy,
professional WEEE must be sent to treatment plants suitable
for these types of waste. Please contact the Apen Group for
end-of-life products so as to obtain all the information necessary
for their correct waste disposal, which is possible thanks to the
Collective System (Union) to which the company is associated.
Please remember that product disposal without complying with
the mode described above is a violation liable to administrative
and penal sanctions.
