
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
7032 SOUTH 196th - KENT, WA. 98032 - (206) 872-0141 / FAX (206) 872-8710
OPERATION / MAINTENANCE MANUAL
MODEL 50/75 AUGER
IV. PREPARATION AND OPERATION (Continued...)
IV-4. Plumbing the Vibro Hoses to the Power Unit.
There are five hoses leading from the vibro that must be connected to the power unit to begin
operation. There are two big hoses, two little hoses and one middle sized hose. The hoses attach
to the power unit by screwing the quick disconnect couplers onto the proper couplers of the power
unit. The couplers on the power unit are mated with the couplers on the vibro so there is no chance
of putting them on backwards. Please take the following steps when installing the couplers:
WARNING: TURN THE POWER UNIT OFF BEFORE INSTALLING COUPLERS
1.)
Turn the power unit OFF.
2.)
Clean all couplers with a can of ether if available. A clean dry cloth will also work but will
require extreme care. Fittings must be spotlessly clean.
3.)
Install couplers by screwing them onto their respective counterparts. Try to avoid cross-
threading and maintain a straight line. Jerk the hose back and forth while turning coupler to
aid installation effort.
Push hard to get the big coupler threads started.
4.)
Make sure fittings are tight. If they are properly cleaned they should run up tight with just
a firm hand grip. However, they should be double checked with a chain wrench.
5.)
Avoid over-tightening.
6.)
If near salt water, spray with a light oil to prevent oxidation.
7.)
Position the Power Unit so that vibrator has enough hose to reach the work. Avoid pulling
too hard on hoses. Most hose failures are caused by pulling hoses off couplers.
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
12345678901234567890123456789012123456789012345678901234567890121234567890123
Forward/Reverse 1 1/2"
Case Drain 3/4"
Clamp Open/Closed 3/8"
1234567890123456789012345678
1234567890123456789012345678
1234567890123456789012345678
1234567890123456789012345678
1234567890123456789012345678
1234567890123456789012345678
1234567890123456789012345678
Page 4-2
Figure 4-A. Power Unit Coupler Layout