
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
12345678901234567890123456
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
1234567890123456789012345
7032 SOUTH 196th - KENT, WA. 98032 - (206) 872-0141 / FAX (206) 872-8710
OPERATION / MAINTENANCE MANUAL
MODEL 50/75 AUGER
III. LOADING AND UNLOADING
III-1. Model 50/75 Auger.
The APE 50/75 auger is normally shipped laying flat on the trailer deck and the hose bundle is coiled
on top. Lift the auger and hose bundle as one load. Avoid smashing hydraulic lines. Auger should be
loaded with the swivel king and hoses facing the sky. Before the truck has left, carefully inspect the
machine and hoses for any missing equipment or sign of damage that may have occured during
shipment or unloading.
III-2. APE Power Unit.
The Power Unit is always loaded with the oil cooler facing to the rear of the truck to prevent damage to
the cooler and the radiator from flying objects. The Power Unit is usually held to the truck by wrapping
a chain around both ends of the fuel tank base and the truck bed. After loading the Power Unit, tape the
exhaust rain cap shut to prevent rain water from getting inside. If quick disconnects do not have safety
cables, then store them under the panel in the storage box rather than risk the possibility of the caps and
plugs coming loose and falling off into traffic. Make sure all doors are fully closed. Tighten fuel cap to
prevent diesel fuel from washing out the fill spout.
III-3. What to do if damaged during shipment.
In the event of damage, notify the trucking agent at once. Note all damage on the bill of lading. Fax the
information as soon as possible, any delay may make it impossible to find the responsible party.
123456789012345678901234567
123456789012345678901234567
123456789012345678901234567
123456789012345678901234567
123456789012345678901234567
123456789012345678901234567
123456789012345678901234567
Page 3-1