7032 SOUTH 196th - KENT, WA 98032 - (253) 872-0141 / FAX (253) 872-8710
OPERATION / MAINTENANCE MANUAL
Figure 1-A. Machine Features
- Cummins engine M11
- 350 HP
- Lockable sheet metal enclosure
- 5000 (345bar) psi system
- Complete tool box provided
- Bi-directional flow
- 50 foot (15m) electric pendant
- Backup controls mounted on panel
- Engine safety shutdowns built in
- Sound reduction by design
- Easy to change hydraulic filters
- One loop hydraulic system
- Large cooler keeps oil temp down
- Radio control available
APE MODEL 100 VIBRO/SPROCKET
DRIVE
FOR INSTALLING WICK DRAINS. VIBRO CAN BE USED FOR
DRIVING OR EXTRACTING ALL TYPES OF PILES
APE MODEL 350 POWER UNIT
HYD POWER SOURCE FOR VIBROS, AUGERS, DECK WINCHES,
HYD. IMPACT HAMMERS, ETC.
I-1. Machine Features
I. GENERAL INFORMATION
-
Wick mandrel passes through center of vibro
- One piece gear/eccentric design
- No pins, splines or keyways on eccentrics or gears
- 1,000 inch pounds - very powerful
- Can mount and operate off backhoe
- Can be used under water
- Clamp fits H-beams & plates
- Attachments for wood & pipe piles
- Sprockets transfer torque to both sides of mandrel
- No side loads on mandrel
- Speeds up to 330 feet per minute
- Static load or dynamic load or both at same time
Page 1-1
BOTTOMDRIVE
