7032 SOUTH 196th - KENT, WA 98032 - (253) 872-0141 / FAX (253) 872-8710
OPERATION / MAINTENANCE MANUAL
I. GENERAL INFORMATION (Continued...)
I-2. Machine Specifications
I-2A. Model 100 Vibro - (Table 1-A.)
Cummins M11
350
1800
5000 psi (345 bar)
230 gpm
230 gpm
2700 psi
10,000 lbs.
122 inches
66 inches
70 inches
Engine
Maximum Power
Operating Speed in rpm
Maximum Drive Pressure
Max.Hyd.Flow-Forward
Max.Hyd.Flow-Reverse
Operating Pressure
Weight
Length
Width
Height
Note: This power unit is equipped with the necessary pumps to operate
the sprocket drive and the spotter functions. Vibro runs off the crane.
I-2B. Model 350 Power Unit - (Table 1-B.)
Dimensions may vary depending on the year and model.
Consult the factory for certifications on unit being used.
Page 1-2
BOTTOMDRIVE
Vibro dynamic force:
25 tons
Eccentric moment:
1000 in-lbs
Frequency:
0 to 1600 cpm
Suspended weight:
9,500 lbs
Length:
6 feet
Width:
30 inches
Height:
13 feet
Static force:
25 tons
Tons per square foot:
500
Dynamic force of 25 tons is calculated at
1350 cycles per minute. The vibro can
operate safely up to 1600 cycles per minute
with standard splash oil system. With
optional forced lubrication the unit can vibro
up to 2300 cylces per minute.
