APB-DynaSonics ProDesk-4, Руководство пользователя

Страница: 29 / 40

ProDesk-4 OWNER’S MANUAL
29
STEREO PROGRAM IN
Stereo Program In
This section serves as a general-purpose, stereo input into the console. Any of the 3 sources can be selected as the input
signal; all selected sources are summed together. The resulting signal can be EQ’d and assigned to any of the Main buses, the
Matrix, and Aux 1-2 pair.
Stereo Pgm In Jack 1/8” (3.5mm) mini-TRS jack
This Top-Panel mounted 1/8” jack is designed to accept a stereo
signal from an iPod or other music player. The signal is available as
the “Top Analog” source for the Stereo Program In section.
Top Analog (with Green LED)
When this switch is depressed, the audio from the Top Panel mini-
jack is selected (or mixed) to the Stereo Program input circuits.
Rear Analog (with Yellow LED)
When this switch is depressed, the audio from the rear-panel
Stereo Pgm Input jacks is selected (or mixed) to the Stereo Program
circuits. Both TRS and RCA jacks are present and are simultaneously
available (see the Master Interface Panel for connector details).
Rear USB (with Blue LED)
When this switch is depressed, the audio from the USB interface is
selected (or mixed) to the Stereo Program In circuits. See the Rear
Panel Connections section for more information about the USB
features on the ProDesk.
Stereo EQ
High & Low Freq EQ is available to adjust the tonal balance of the
selected (mixed) input sources. Both controls have a shelving
response; High-Freq corner frequency is 10KHz, Low-Freq corner
frequency is 80Hz.
Signal & Peak LEDs
These bi-color Green/Red LEDs monitor the signal level of the
stereo signals. Varying intensity Green shows the post-EQ signal
level, while Red indicates that signals are approaching 3dB of
clipping both pre and post the level control.
Level Control
Controls the level of the post-EQ Stereo Program into the assigned
buses. Up to +10dB of gain is available on this control.
Mute Switch (with Red LED)
Mutes the stereo signal to the assigned buses.
PFL Switch (with Yellow LED)
When pressed, this latching switch will route the Pre-level Stereo Pgm signal to the Master section for display on the
Master solo meters and into the monitor/headphone systems. The feed to the Solo system is stereo and is not affected
by the Mute switch.
Bus Assignment: L-R, Center, Mono, Matrix 1-2, Matrix 3-4, Aux 1-2
Assigns the post-level, post-mute stereo signal to the selected buses. For the stereo-paired buses (L-R, Mtx 1-2, Mtx 3-
4, Aux 1-2), the signals are assigned stereo-left to Left/Odd, stereo-right signals to Right/Even buses. For any mono
assignment buses (Center or Mono), the stereo program signals are summed to mono when assigned.