APB-DynaSonics ProDesk-4, Руководство пользователя

Страница: 14 / 40

APB-DynaSonics
14
MONO INPUT - AUXILIARY SENDS
Aux 1-6 Pre-Fader / Pre-EQ Switch
This switch defines the “Pre” signal source for all Auxes:
Up is Pre-Fader (and Post-EQ), Down is Pre-EQ.
Internally, the default Pre-EQ source is set to Post-insert.
A qualified technician can change this to Pre-insert (Post HPF) on a channel-by-channel basis.
Aux Sends 1-2 can be selected between mono and stereo:
Aux 1 Level Control
When in normal (Mono) mode, this knob controls the signal level feeding the Aux 1 mix bus.
When the Aux 1-2 Stereo switch is depressed, this control is now reconfigured into a pan control,
which adjusts the balance of channel signal being fed to Aux buses 1-2.
Aux 2 Level Control
When in normal (Mono) mode, this knob controls the signal level feeding the Aux-2 mix bus.
When the Aux 1-2 Stereo switch is engaged, this control becomes the Aux 1-2 level control.
Aux 1-2 Post-Fader/Pre-Source
T h i s sw i tc h sel ec ts th e sig n a l sou rc e f or A u xe s 1-2 b et w ee n Pos t-fa d er ( U p) a n d Pr e-S ou rc e (D o wn )
a s de te r mi n e d b y th e A ux Pr e-So u rc e sel ec t swi tc h ( ab ov e ).
Aux 1-2 Stereo Switch
Reconfigures the individual Aux 1 and 2 controls from two level controls to a Pan control (1) and a
Level control (2). This enables a stereo mix to be generated from within the Aux send section for
use with stereo headphones, effects, or for a discrete stereo mix for recording or broadcast use.
Aux Sends 3-4 and 5-6 are always mono:
Aux Level Controls 3-4
Controls the mix levels of the channel into Aux buses 3 & 4.
Aux 3-4 Post-Fader/Pre-Source
This switch selects the signal source for Aux 3-4 between Post-Fader (Up) and Pre-Source (Down).
Aux Level Controls 5-6
Controls the mix levels of the channel into Aux buses 5 & 6.
Aux 5-6 Post-Fader/Pre-Source
This switch selects the signal source for Aux 5-6 between Post-Fader (Up) and Pre-Source (Down).
Discrete Sub Woofer Feed Using Aux Sends (Aux-Fed Sub)
Aux 6 should be used if a controlled-level Subwoofer send is desired. In the Master Section, the
output level control for Aux 6 can be swapped from its default rotary control to the (Mono)
100mm fader. This gives the operator a convenient and precise level control to adjust the
Subwoofer output. See the Master Section of the manual for more details.