APB-DynaSonics ProDesk-4, Руководство пользователя

Страница: 16 / 40

APB-DynaSonics
16
MONO INPUT - BUS ASSIGNMENT AND PANNING
Pan Control
This control blends the post-fader signal between any of the assigned bus pairs: L-R, Group1-2 and
Group 3-4. When at the center, detented position, both sides are fed equal amounts of signal (each
down by 3dB). This pan control has no effect on the Mono or Center mix buses.
Mono Assignment Switch
Assigns the post-fader channel signal to the Mono mix bus. It can be used as a general-purpose
post-fader output for an additional primary console output. It may also be used as Mix B of an A-B
vocal mix.
Center Assignment Switch
Assigns the post-fader channel signal to the Center mix bus. In mono sound systems, this bus can be
used as the primary output (leaving the L-R output available for stereo recording). It is usually used
in LCR installations to feed a discrete signal to the center speaker. It may also find use as a general-
purpose post-fader output for use as an additional Aux or matrix send or as Mix A of an A-B vocal
mix.
L-R Assignment Switch
Assigns the post-fader channel signal to the Left-Right mix buses through the Pan Control.
1-2 Assignment Switch
Assigns the channel signal to the Group 1 & 2 mix buses through the Pan Control. The Groups can
be used independently using their own insert & XLR output jacks, or used as subgroups and
assigned back into the Main mix buses (See Master Section- Groups).
3-4 Assignment Switch
Assigns the post-fader channel signal to the Group 3 & 4 mix buses through the Pan Control.
Operation is the same as the Group 1 & 2 assignment.