AP UC1200, Руководство пользователя

Страница: 26 / 58

26
5.7 ADDING A SATELLITE UNIT
A pilot unit of type AFC System or Nature System will control up to two remote filter units and three re
oxygenising units. A pilot unit of type Basic System will control one remote filter unit and two re oxygenising
units.
In order to make this configuration a machine of type UC1200-01, UC1200-31 or UC1200-32 is used, joined
to a machine without control circuit, denominated UC1200-00, identical for all technology versions. The
electrical connection between the two is all that is needed.
5.7.1 Connection of high voltage cables
Before closing the machine, connect the micro switch and power to the fan motor.
1) Remove the grill by pushing the black hatches
towards the center
2) Remove the 4 screws that secure the circuit
and pull it downwards to extract
3) Remove the contact plate fixing screws
4) Use
exclusively special high voltage supplied
with the machine. Two cables (red and blue)
are used for all systems, whereas Nature
System and Basic System have an additional
black cable.
5) Insert the special cables, fitted with appropriate
sheet, through the hole labelled EAT OUT of
the contact plate
6) Connect the high voltage cables to the red
isolators of the circuit plate, matching the
colours of cables (red to red, blue to blue, and if
applicable, - black to green) .
7) Open the remote unit (satellite) as described
above (point 1, 2 and 3)
8) Pass the cables with sheet through the hole
EAT IN of the contact plate
9) Connect the high voltage cables to the red
isolators as already done with the pilot unit
10) In case a second satellite is to be fitted, repeat
the procedure as described above, using a new
sheet with high voltage cables, making an
electrical bridge between satellite unit 1 and
satellite unit 2
ATTENTION : the special high voltage cables
and their accessories are critical for function
and safety, and must under no circumstances
be substituted with inferior products. They must
only be connected to the red isolators of the
circuit boards.
Circuit
Contact plate
Feb . 12
Automatikprodukter