AP UC1200, Руководство пользователя

Страница: 50 / 58

50
11.6 PURIFICATION
The Air Purifier purifies the air by means of a high-efficiency electrostatic filter whose operation is governed
by an electronic circuit which guarantees optimal and constant performance with time in any situation.
11.7 SIGNALS
The electronic control of this apparatus provides the user visually with all the information on operation
required for correct use, and makes available the means for fast checking to seek any small anomalies, by
means of the RESET - TEST - ON/OFF FILTER buttons.
11.8 STATE OF FILTRATION EFFICIENCY
As described in paragraph CONTROL PANEL, the three Leds of FILTRATION STATUS provide indications
on the state of filtration efficiency.
The purifying cycle remains active until optimal air filtration is obtained, indicated by the FILTER OK or PRE-
ALARM Leds. If optimal filtration is not guaranteed the red Led MAINTENANCE will go on (Led FILTER ON
off). In this case only the electric fan will run.
To turn off the alarm, simply turn off the machine, turning it to 0 (zero), and then start it again at any one of
the three speeds; if the operating condition with the red MAINTENANCE Led persists, carry out a general
check of the filtering system, see ORDINARY MAINTENANCE.
Feb . 12
Automatikprodukter