21
Using the numeric keypad, enter a new frequency followed by the
[ENT]
key
([KHz]
key
or
[MHz]
key.)
Step Frequency (Ch. STEP)
Press the
[Ch. STEP]
key using the center
Special Function Keys
. The icon indicating
the step frequency will be reversed prompting the entry of new step frequency. Using the
numeric keypad, enter a new step frequency followed by the
[ENT]
key
([KHz]
key or
[MHz]
key.)
End (Stop) Frequency
Press the
[Ch. END]
key using the right
Special Function Keys
. The icon indicating the
end (stop)frequency will be reversed prompting the entry of a new end (stop) frequency.
Using the numeric keypad, enter a new end (stop)frequency followed by the
[ENT]
key
([KHz]
key or
[MHz]
key.)
Receive Frequency (RX. FREQ)
After setting, the receiver will monitor the start frequency. To change the receive
frequency, move the marker using the rotary dial encoder and press the
[MK.F]
key.
[
Memo
:
End (Stop) frequency limit
:
It is calculated by the following formula.
(CH. START) + [(Ch. STEP) x 160] or (Ch. START) + 5 MHz
6-6-4 Other Settings
Reference Level (AMPLITUDE)
A 60 dB range is displayed on the scale which is divided into 10 dB increments.
The reference level can be selected between 0 dBm ~ -30 dBm in 10 dB steps
with 4 selectable steps.
Press the
[AMPLITUDE]
key located between the LCD display and the rotary dial
encoder. The icon indicating the current reference level will be reversed prompting a
new entry. Using either the numeric keypad or the rotary dial encoder, enter a new
reference level.
[Example: Reference level -20 dBm]
