13
The three (3) of the right column of the Main Control
Keys are used for this setting.
[MODE] key:
This is to select the receive mode.
To select the receive mode, perform the following steps:
1. Press
the
[MODE]
key.
2. Then the icon indicating the current mode will blink.
3. Rotate the main tuning dial to select the desired receive mode.
4. Press
the
[ENT]
key to complete the setting.
[STEP]
key: This is to select the tuning frequency step of the receiver.
To select the tuning frequency step, perform the following steps:
1. Press
the
[STEP]
key.
2.
Then the icon indicating the current tuning frequency step will blink.
3.
Using the numeric keypad, enter the desired step.
4. Press
the
[ENT]
key to complete the setting.
[ATT]
key: This is to select to activate/deactivate the RF attenuator function.
Pressing the
[ATT]
key will toggle between
ON
and
OFF
.
Memo: AUTO Mode Setting of the receiver
When the AR5000 receiver is set to the AUTO receive mode, the AR5000 will
automatically select the proper receive mode and the IF filter according to the
receive frequency. Under this setting, the IF filter cannot be selected by the SDU5600.
6-4 Controlling the receive frequency
6-4-1
Spectrum Analyzer Mode
