69
9-12 CONFIGURE VERSION
To display the current firmware version of the AR6000, perform the following steps:
1. Press the [
FUNC
] key, and then press the [
kHz
] key.
2. Press the [
UP
] key three times to select “VERSION” in reverse contrast.
3. Press the [
MHz
] key to display the current firmware version of the receiver.
(Note: Version may vary.)
4. Press any key to return to a standard display.
9-13 CONFIGURE INITIALIZE (RESET)
Initializing the AR6000 will return it to the original factory default settings and all memory contents will be
deleted.
To initialize the AR6000, perform the following steps:
1. Press the [
FUNC
] key, and then press the [
kHz
] key.
2. Press the [
UP
] key to select “INITIALIZE” in reverse contrast.
3. Press the [
MHz
] key to continue.
4. If you wish to initialize, press the [
MHz
] key. To cancel, press the [
CLR
] key.
5. After initialized, the receiver will be powered off automatically, and then restart.
9-14 CONFIGURE MEMORY CHANNEL ASSIGNMENT
A number of memory channels of each memory bank can be freely assigned by user between 5 ~ 95
(not exceeding a total of 2000 channels.)
The default setting is 50 channels x 40 banks.
Содержание AR6000
Страница 1: ... AR6000 Super Wide band Multi mode Receiver Operating manual AOR LTD ...
Страница 91: ...90 13 SPECIFICATIONS ...
Страница 94: ...93 ...
