59
1. Press the [
FUNC
] key, and then press the [
SCAN
] key. The search link screen will appear.
2. Select the bank link group number, and then press the [
DOWN
] key.
The pause setting screen will appear.
3. Rotate the sub dial to set search pause parameter (between 1 ~ 60 or off). To set search pause to
off (zero), press the [
PASS
] key or enter “0” from the numeric keypad.
4. To confirm entry, press the [
MHz
] key. To set other parameters, press the [
DOWN
] key.
8-2-3 SEARCH DELAY
The search delay parameter affects the time the AR6000 will remain on an active frequency in search
mode once the received signal has disappeared and the squelch is closed. This is particularly useful for
customizing how long the receiver will wait for a reply before continuing to search.
The parameter ranges are off, hold and 0.1 to 9.9 seconds.
To set the search delay parameter, perform the following steps:
1. Press the [
FUNC
] key, and then press the [
SRCH
] key. The search link screen will appear.
2. Select the bank link group number, and then press the [
DOWN
] key twice.
The pause delay screen will appear.
3. Rotate the sub dial to select the search delay. If “hold” is selected, the receiver will stop searching
when the signal is received until either the [
UP
] key, [
DOWN
] key is pressed.
4. To confirm entry, press the [
MHz
] key. To set other parameters, press the [
DOWN
] key.
8-2-4 VOICE SEARCH
When the voice search function is activated, the search process will stop only on active frequencies
which have modulation (such as voice) present. The AR6000 will not remain on unmodulated
frequencies (such as blank carriers).
Содержание AR6000
Страница 1: ... AR6000 Super Wide band Multi mode Receiver Operating manual AOR LTD ...
Страница 91: ...90 13 SPECIFICATIONS ...
Страница 94: ...93 ...
