AOR AR6000, Руководство по эксплуатации

Страница: 47 / 95

46
7-4 DISPLAYING A MEMORY CHANNEL TEXT
To display a memory channel text, press the [ FUNC ] key and then press the [ MHz ] key.
Each time the above step is performed, the display contents change as follows:
1. Text only
2. Text and frequency
3. Frequency only (normal display)
7-5 SELECT SCAN
Select scan enables you to ‘tag’ memory channels to make a temporary list up to 100 channels in the same
memory bank for scanning in a separate list called the select scan list. The selected memory channels in
the select scan list will be received even though they are set to be passed (skipped).
7-5-1 ADDING SELECT SCAN CHANNELS IN MEMORY READ MODE
In memory read mode, press the [ FUNC ] key, and then press the [PASS] key to toggle the select scan
tag on/off. “ S ” appears on the left of the memory bank of the LCD.
7-5-2 DELETE SELECT SCAN CHANNELS IN MEMORY READ MODE
To delete all selected scan channels, perform the following steps:
1. Press the [ FUNC ] key, and then press and hold the [ . (period)] key for two seconds.
2. The following delete menu will appear with “DEL MEM-CH” in reverse contrast.
3. Press the [ DOWN ] key to move the cursor downward. Select “DEL SEL-CH” in reverse contrast.
4. When the select scan memory has registered channels, “ ** ” will be displayed on the bottom
right corner of the LCD. If there is no registered channel, “- -“ will appear.