Step 1 Faucet installation
2
1
3
HOT
COLD
HOT
COLD
1.Assemble the 2 flexible hose to the faucet by hand.
2.Put the faucet into the installation hole of the basin. Make sure o-ring be on the base of faucet. Assemble screw #17
to the base of faucet, and assemble rubber washer #15 and clamp #16 to screw #17. Then assemble lock nut #18 by
basin wrench to screw #17 to fix the faucet.
3.Connect the
to water supply valve (not included), and tighten it with adjustable wrench.
DON'T OVER TIGHTEN!
Caution: make sure connect the hot and cold flexible hoses to supply valves correctly.
flexible hose
Warning:
The supply valves are not included, please purchase them in plumb shop.
O-ring
Step 2 Checking and testing
1.Turn the faucet handle all the way on, turn on hot and cold water supply and flush water lines for one minute.
2.Check all connections at arrows for leaks, re-tighten it if necessary.
BUT DON'T OVERTIGHTEN!
2
1
Step 3 Cleaning and care
Daily cleaning and care are required in order to keep the product shining and
properly working.
1
2
3
4
Clean it with water and dry it with soft cloth.
Clean the product with gentle liquid or glass cleaner.
Don't use acid cleaner.
Don't clean with abrasive material, abrasive paper or knife.
17
15
16
18
