
77 (136)
#
Name
Ac-
cess
Data Type
Default
Value
Comment
17
IP address byte
0–2
Get
Array of
UINT8[3]
[0] = 192
[1] = 168
[2] = 0
First three bytes in IP address. Used in “shift register
mode” if the configuration switch value is set to 1-245. In
that case the IP address will be set to:
Y[0].Y[1].Y[2].X
Where Y0-2 is configured by this attribute and the last
byte X by the configuration switch.
18
Get
Ether-
net
PHY
Con-
figura-
tion
Array of
BITS16
0x0000 for
each port
Ethernet PHY configuration bit field. The length of the ar-
ray shall equal the number of Ethernet ports of the prod-
uct. Each element represents the configuration of one
Ethernet port (element #0 maps to Ethernet port #1, ele-
ment #1 maps to Ethernet port #2 and so on).
Note
: Only valid for EtherNet/IP and Modbus-TCP
devices.
Bit 0:
Auto negotiation fallback duplex
0 = Half duplex
1 = Full duplex
Bit 1–15:
Reserved
Network Status
This attribute holds a bit field which indicates the overall network status as follows:
Bit
Contents
Description
0
Link
Current global link status
1= Link sensed0= No link
1
IP established
1 = IP address established
0 = IP address not established
2
(reserved)
(mask off and ignore)
3
Link port 1
Current link status for port 1
1 = Link sensed
0 = No link
4
Link port 2
Current link status for port 2
1 = Link sensed
0 = No link
5... 15
(reserved)
(mask off and ignore)
Anybus
®
CompactCom
™
40 EtherCAT
®
Network Guide
SCM-1202-034 1.1
Содержание CompactCom 40 EtherCAT
Страница 1: ...Anybus CompactCom 40 EtherCAT NETWORK GUIDE SCM 1202 034 1 1 ENGLISH...
Страница 6: ...This page intentionally left blank...
Страница 118: ...This page intentionally left blank...