
71 (136)
6.4
EtherCAT Object (F5h)
Category
Basic, extended
Object Description
This object implements EtherCAT specific settings in the host application.
The implementation of this object is optional; the host application can support none, some, or all of the attrib-
utes specified below. The module will attempt to retrieve the values of these attributes during startup; if an at-
tribute is not implemented in the host application, simply respond with an error message (06h, “Invalid
CmdExt[0]”). In such case, the module will use its default value.
If the module attempts to retrieve a value of an attribute not listed below, respond with an error message
(06h, “Invalid CmdExt[0]”).
Support for this object is optional. If implemented, it is highly recommended to support all attributes in the range
1... 6.
To pass conformance tests, the end product has to have a Vendor ID valid for the end product vendor.
See also...
•
Anybus CompactCom 40 Software Design Guide, “Error Codes”
Supported Commands
Object:
Get_Attribute
Instance:
Get_Attribute
Object Attributes (Instance #0)
#
Name
Access
Type
Value
1
Name
Get
Array of
CHAR
“EtherCAT”
2
Revision
Get
UINT8
01h
3
Number of instances
Get
UINT16
0001h
4
Highest instance no.
Get
UINT16
0001h
Anybus
®
CompactCom
™
40 EtherCAT
®
Network Guide
SCM-1202-034 1.1
Содержание CompactCom 40 EtherCAT
Страница 1: ...Anybus CompactCom 40 EtherCAT NETWORK GUIDE SCM 1202 034 1 1 ENGLISH...
Страница 6: ...This page intentionally left blank...
Страница 118: ...This page intentionally left blank...