manualshive.com logo in svg

Anybus Communicator - CANopen, Руководство пользователя

Поделиться
Скачать
Anybus Communicator - CANopen Скачать руководство пользователя страница 33

Basic Settings   

28

Doc.Id. SCM-1200-121

Anybus Communicator CAN to CANopen
Doc.Rev. 1.00

8.2 Communicator Settings

Select ‘Communicator’ in the Navigation Section 
to gain access to the parameters described in this 
section. The figure shows the available parame-
ters. 

General

Statistics

Fatal Event

The action in case of a fatal software event is decided by this parameter

Parameter

Comment

Control/Status Word

a

a. If the Control/Status Word or the Transaction Live List are going to be used, it is recommended to enable these 

before any frames are added when building the configuration, to avoid memory address collisions.

If the Control/Status word is enabled it occupies the first two bytes of the out/in area of the mem-
ory. 
See also..

 “Control/Status Word” on page 17

Start-up Operation 
Mode

If the Control Word is enabled, it is possible to decide the start-up mode of the subnetwork. The 
start-up mode can be either ‘Run’ or ‘Idle’.

Transaction Live List

a

If the Transaction Live List is enabled it is mapped from the beginning of the input area or, if the 
Control/Status Word is enabled, after the Status Word. It is possible to map from 8 to 128 trans-
actions, in steps of 8. Each transaction is represented by a bit that tells the system whether the 
transaction is alive or not. 
See also ...
 “Transaction Live List” on page 18

Parameter

Comment

Counters

a

a. If any counters are going to be used, it is recommended to enable these before any frames are added when build-

ing the configuration, to avoid address collisions in the memory.

The receive counter and the transmit counter count successful CAN messages on the sub-
network. If enabled, the counters can be mapped to the input data area. The counters can be 
disabled and enabled separately. 

Receive Counter 
Address

a

Enter the address in the input data area where the receive counter shall be mapped. The 
receive counter occupies 2 bytes. 

Transmit Counter 
Address

a

Enter the address in the input data area where the transmit counter shall be mapped. The 
transmit counter occupies 2 bytes. 

Parameter Values

Comment

Action

Stay in Safe-State

The Communicator will be locked in the safe state 

Software Reset

The software will be reset and the Communicator will be restarted automatically

Содержание Communicator - CANopen



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды