manualshive.com logo in svg

Anybus Communicator - CANopen, Руководство пользователя

Поделиться
Скачать
Anybus Communicator - CANopen Скачать руководство пользователя страница 28

Doc.Id. SCM-1200-121

Anybus Communicator CAN to CANopen
Doc.Rev. 1.00

Chapter 7

7. Anybus Configuration Manager

The Anybus Configuration Manager (ACM) is used to configure all aspects of the Communicator CAN. 
It also provides different tools for monitoring the module and the CAN subnetwork.

Note

: The configuration manager automatically allocates addresses and memory space in the input and 

output areas of the Communicator for the data objects that are configured. It is possible to change these 
addresses, but it is recommended to finish the configuration using default addresses before starting to 
change any addresses. A valid address range is always shown in the information section of the main win-
dow.

7.1 Main Window

The main window in the Anybus Configuration Manager (ACM) is divided into 4 sections as follows:

1. Pull-down Menus & Toolbar

The toolbar provides quick access to frequently used functions.

2. Navigation Section

This section is the main tool for building, selecting and altering different levels of the subnetwork 
configuration. On most entries, right-clicking will give access to the different selections related 
to that particular entry.

3. Parameter Section

This section holds a list of parameters or options related to the currently selected entry in the 
Navigation Section.
The parameter value may be specified either using a selection box or entering a value manually, 
depending on parameter.

4. Information Section

This section presents information related to the parameter where the pointer is hovering.

1

2

3

4

Содержание Communicator - CANopen



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды