73 (124)
5.14.2
Interface Setting
Enable the IP Routing interface and assign the IP Address.
Before creating the IP Interface, create the VLAN Interface and assign the member port to the
VLAN, refer to the VLAN Configuration.
All the created VLANs are automatically listed in the IP Interface table.
Fig. 54
IP Interface Setting
IP Interface
Configure the IP Interface settings:
Interface
The name of the IP interface.
Status
When the routing state is enabled, the Status shows Up.
When the routing state is disabled, the Status shows Down
State
Enable or Disable the IP Routing Interface state.
When disabled, the interface work as a layer 2 VLAN.
When enabled, the interface can support IP routing feature.
IP Address
Assign the IP Address for the target IP Interface.
Subnet Mask
Select subnet mask.
Example: 255.255.255.0 represents for the typical Class C, or so-call 24-bits mask.
There are 256 IP Addresses within the range.
To apply the settings, click
Submit
.
Alias IP Table
Configure the IP Table settings:
Interface
Select the interface.
Alias IP Address (A.B.C.D/M)
The alias IP and its subnet mask
To add the interface, click
Add
.
To delete the interface, click
Remove Selected
.
Anybus
®
Managed Industrial L3 Switch User Manual
SCM-1202-151 1.1 en-US
