44 (124)
Add Association
Configure the Association settings:
Domain Name
Select the Domain Name from the list.
Association Name Enter the Association Name. Association name, maximum of 45 characters
VLAN
Select the assigned VLAN.
Please create VLAN first, and each port set to be tagged.
Transmit Interval
(ms)
Select the Transmit Interval from the list.
To add the settings, click
Add
.
Add Endpoint
Points at the edge of the domain, define the boundary for the domain.
A MEP sends and receives CFM frames through the relay function, drops all CFM frames of its
level or lower that come from the wire side.
Domain
Association Name
Choose the Domain Association Name that has been added
Endpoint Type
Choose between Local Endpoint and Remote Endpoint
Local Endpoint: Set the port as the Continuity Check Message (CCM) sender.
Remote Endpoint: Set the port as the Continuity Check Message (CCM) receiver.
Default: Local Endpoint
Port
Choose port that need to be assigned
Default: Port 1
MEP ID
Choose the MEP ID. One MEP refer to one MEP ID
Default: 1
To add the settings, click
Add
.
Domain Table
Fig. 27
Domain Table
The Domain Table shows the Domain entry.
To remove the list, click
Remove Selected
.
To cancel settings, click
Cancel
.
Anybus
®
Managed Industrial L3 Switch User Manual
SCM-1202-151 1.1 en-US
