104 (124)
5.18.4
Port Mirror
With the Port mirroring tool data transmitted through a specific port can be monitored. Use this
feature for diagnostics, debugging, and analysis.
Set up another port (the mirror port) to receive the same data that is transmitted from, or both
to and from, the port under observation.
Using a mirror port allows the network administrator to sniff the observed port to keep tabs on
network activity.
Any traffic will be duplicated at the Destination Port.
Fig. 85
Port Mirror
Configure the Port Mirror settings:
Port Mirror
Enable or Disable the Port Mirror.
Source Port
The ports to be monitored.
The traffic of all source ports will be duplicated to the destination ports.
Select a single port, or multiple ports.
To select the source ports, click on the Port ID, RX, Tx or Both checkbox.
Destination Port
Analyze the traffic of all the monitored ports at this port, without affecting the flow of traffic on the
port being monitored.
Only one RX/TX of the destination port can be selected.
To apply the settings, click
Submit
.
Anybus
®
Managed Industrial L3 Switch User Manual
SCM-1202-151 1.1 en-US
