background image

LIMITED WARRANTY

Equipment manufactured by A.J. Antunes & Co. (Antunes) has been constructed of the finest materials available and manu-

factured to high quality standards. These units are warranted to be free from electrical and mechanical defects for a period of 

eighteen (18) months from date of purchase under normal use and service, and when installed in accordance with manufacturer’s 

recommendations. To insure continued operation of the units, follow the maintenance procedures outlined in the Owner’s Manual. 

During the first 18 months, electro-mechanical parts, non-overtime labor, and travel expenses up to 2 hours (100 miles/160 km), 

round trip from the nearest Authorized Service Center are covered.

1. 

This warranty does not cover cost of installation, defects caused by improper storage or handling prior to placing of the 

Equipment. This warranty does not cover overtime charges or work done by unauthorized service agencies or person-

nel. This warranty does not cover normal maintenance, calibration, or regular adjustments as specified in operating and 

maintenance instructions of this manual, and/or labor involved in moving adjacent objects to gain access to the equipment. 

This warranty does not cover consumable/wear items. This warranty does not cover damage to the Load Cell or Load Cell 

Assembly due to abuse, misuse, dropping of unit/shock loads or exceeding maximum weight capacity (4 lbs). This warranty 

does not cover water contamination problems such as foreign material in water lines or inside solenoid valves. It does not 

cover water pressure problems or failures resulting from improper/incorrect voltage supply. This warranty does not cover 

Travel Time & Mileage in excess of 2 hours (100 miles/160 km) round trip from the nearest authorized service agency. 

2. 

Antunes reserves the right to make changes in design or add any improvements on any product. The right is always re-

served to modify equipment because of factors beyond our control and government regulations. Changes to update equip-

ment do not constitute a warranty charge.

3. 

If shipment is damaged in transit, the purchaser should make a claim directly upon the carrier. Careful inspection should be made 

of the shipment as soon as it arrives and visible damage should be noted upon the carrier’s receipt. Damage should be reported 

to the carrier. This damage is not covered under this warranty.

4. 

Warranty charges do not include freight or foreign, excise, municipal or other sales or use taxes. All such freight and taxes 

are the responsibility of the purchaser. 

5. 

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, IN-

CLUDING ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, EACH 

OF WHICH IS HEREBY EXPRESSLY DISCLAIMED. THE REMEDIES DESCRIBED ABOVE ARE EXCLUSIVE AND IN 

NO EVENT SHALL ANTUNES BE LIABLE FOR SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR THE 

BREACH OR DELAY IN PERFORMANCE OF THIS WARRANTY.

+1 (630) 784-1000

+1 (800) 253-2991

+1 (630) 784-1650

+86-512-6841-3907

+86-512-6841-3637

Содержание GST-2V

















Отзывы: