ANTTI Vacboost M13, Инструкция по установке и эксплуатации

Страница: 46 / 73

Antti-Teollisuus Oy 46 408111 03-2019
Vacboost M13
3.1.4 Bypass button
Using the bypass button (3), you can go from the filling phase straight to the drying phase, without stopping the
appliances (see 5.1 Filling).
3.1.5 Start button
Using the start button (2), you can start the drying process of grain automatically (see Starting the drying process).
3.2 Operating hour counter
The operating hour counter (6) counts the operating time of the burner blower with an accuracy of 2 decimals. The
operating hour counter cannot be reset.
3. 3 Outlet air and drying temperature thermostats
The thermostats for the outlet air temperature and the drying temperature (4 and 5) are used in the similar manner.
In its initial state, the thermostat shows the current temperature. Press the SET button (d) twice to show the set
value on the display. You can raise or lower the set value using the arrow keys (A and B). The thermostat will return
to its initial state in 10 seconds or if you press twice the I- button (C).
D
C A
B