Connectivity
Made Easy
Page 24 of 164
b.
No VLAN – Applies to traffic that has no VLAN tag.
4.
Protocol – This specifies the type of network traffic that the firewall
will pick up.
5.
Source Network – The firewall will pick up network traffic originating
from the specified IP address or network.
6.
Source Port – The firewall will pick up network traffic with the
specified source port number.
7.
Destination Network – The firewall will pick up network traffic
heading for the specified IP address or network.
8.
Destination Port – The firewall will pick up network traffic with the
specified destination port number.
9.
Action – This is the action that will be performed for network traffic
that is picked up by the firewall based on the above specified criteria.
10.
Description – A description for the firewall rule.
Click
to confirm the entry (or
for modifications).
1.3.7
Creating a Location
Now partition your network into service locations and attach the different
plans to each location.
To configure the Location:
1.
Click on Locations.
A list of locations will be displayed (see Figure 1-16). Any other locations
added later will also be listed here.
Figure 1-16 Creating a Location
The InnGate comes preconfigured with a default location.
Содержание InnGate 3 E-series
Страница 1: ...INNGATE 3 ADMINISTRATOR S MANUAL DOCUMENT RELEASE 1 01 ...
Страница 49: ...Connectivity Made Easy Page 49 of 164 Figure 2 22 Auto Logout ...
Страница 91: ...Connectivity Made Easy Page 91 of 164 Figure 6 7 Test Posting Log Click button to clear the log ...
Страница 132: ...Connectivity Made Easy Page 132 of 164 Figure 8 28 Change of Telnet Console Password ...
