ANTlabs InnGate 3 E-series Скачать руководство пользователя страница 136

Страница: 136 / 164

Connectivity

Made Easy

Page 136 of 164

9.3.1

HA Identifier

Each of the InnGate in a HA setup is identified by a unique HA identifier which
is used to differentiate the two gateways. This setting is configured in the

Admin GUI.

The ID configured for each machine must be different otherwise the GUI

synchronization, peer detection and HA failover will not function properly.

To setup the HA identifier:

Click on Settings.

Click on High Availability.

Figure 9-2 shows the interface for configuring the HA identifier:

Slave Connected: Indicates if a slave machine is connected to the
machine.

ID for This Unit – The HA ID for this machine (permissible values are
either 1 or 2).

The ID is only used to uniquely distinguish the machines and does

not represent whether the InnGate is the Live or Backup machine.

Figure 9-2 High Availability Configuration

Click

to confirm the changes.

Содержание InnGate 3 E-series





































































































































































Результаты поиска

Содержание InnGate 3 E-series

Отзывы:

Бренды по названию

Популярные бренды

ANTlabs InnGate 3 E-series, Руководство администратора

Результаты поиска

Содержание InnGate 3 E-series

Отзывы:

Бренды по названию

Популярные бренды