Anthos A5 CONTINENTAL, Руководство оператора, Страница: 47 / 100

A5 - A6 PLUS - L6
EN
47
5.7. T LED CURING LIGHT
Technical specifications.
Supply voltage: 24-36 Vdc
Max. power absorbed: 6 VA
Light source: 1 5W LED
Wavelength: 430÷490 nm
Acoustic signals: at cycle start, every 5 seconds, and at cycle end
Type of operation: intermittent (work 3 consecutive cycles - rest 60 sec.)
Programs: 6 (preset).
General description of the lamp.
a
Lamp handle.
b
Rotary end.
c
Fiber optic.
d
Eye protection.
e
Power cord.
f
Control panel.
•
The curing light can be used in different configurations (wand,
gun or any intermediate position) as it is more convenient for
the user
.
•
The curing light is delivered in its original packing which should
be kept for future shipment.
Description of the control panel.
1
LED 1 (STANDARD cycle):
Emission of 1000 mW/sq.cm for 20 seconds (this cycle is set as
default at the time of sale).
2
LED 2 (FAST cycle):
Emission of 1600 mW/sq.cm for 15 seconds.
3
LED 3 (STRONG cycle):
Emission of 1800 mW/sq.cm for 20 seconds.
4
LED S:
When LED S is on, you access ramp cycle mode and at the same time
the LEDs next to the letters B, R and L come on:
[LED S + LED 1] ramp cycle B (BONDING):
Ramp cycle with emission of 500 mW/sq.cm for 5 seconds, ramp from
500 to 1000 mW/sq.cm for 5 seconds and 1000 mW/sq.cm for 5
seconds for a total of 15 seconds.
[LED S + LED 2] ramp cycle R (RAPID RESTORATION):
Ramp cycle with emission of 500 mW/sq.cm for 5 seconds, ramp from
500 to 2200 mW/sq.cm for 5 seconds and 2200 mW/sq.cm for 5
seconds for a total of 15 seconds.
[LED S + LED 3] ramp cycle L (LONG RESTORATION):
Ramp cycle with emission of 500 mW/sq.cm for 5 seconds, ramp from
500 to 1800 mW/sq.cm for 5 seconds and 1800 mW/sq.cm for 10
seconds for a total of 20 seconds.
5
Malfunction signalling LED:
This red LED comes on only if there is a malfunction.
6
START button:
Pressing the START button starts the cycle currently selected (the
cycle LED will come on).
If it is pressed again at any time during the cycle, light beam emission
will immediately be interrupted.
7
MODE button:
This button is used to select the cycle to be run. It allows changing
from the current cycle to the immediately following cycle.
The first three cycles (1, 2 and 3) are at constant power and the LEDs
come on individually. When LED S is on, you access ramp cycle mode
and at the same time the LEDs B, R and L come on.
Once the LED of the cycle you intend to use has come on, the lamp
is ready for use. Pressing the START button, light beam emission is
activated according to the selected cycle.
The cycle can be selected and the button is operative only
when the curing light is not emitting any light. If the button is
accidentally pressed while light is being emitted, nothing will
happen.
Cyc le LED
Total
time
Ø8 mm
Total
energy
STANDARD 1 20" 1,000 mW/cm
2
20,000 mJ
FAST 2 15" 1,600 mW/cm
2
24,000 mJ
STRONG 3 20" 1,800 mW/cm 2 36,000 mJ
BONDING S+1 15" ramp cycle 11,250 mJ
RAPID REST. S+2 15" ramp cycle 20,250 mJ
LONG REST. S+3 20" ramp cycle 26,250 mJ