Antal XT66/AL, Руководство по установке и обслуживанию

Страница: 7 / 12

7
Once you have determined
the location of the skirt on the
deck (see p.5), you can drill the
anchoring holes.
To determine the position of the
holes, mark the deck using the
winch’s skirt’s holes directly.
Alternatively, you can download
the drilling templates from the
internet, at www.antal.it.
Then drill the deck.
In order to prevent water
seepage, put sealant around the
anchoring holes.
Be careful not to obstruct with the
sealant the drainage channels at
the bottom of the winch.
Thus, tighten the bolts.
Once you have fixed the winch
skirt in the correct position, re-
insert the base and the drum.
The XT winches accept a number
of possible positions of the drum.
Choose the desired rotation
of the drum based on the
orientation of the ST arm.
The orientation of the ST arm
depends on where you want to
gather the maneuver.
Once the drum is positioned,
tighten the upper ring.
2
3