Antal XT66/AL, Руководство по установке и обслуживанию

Страница: 6 / 12

6
TOOLS NEEDED
To install the winch, you will need: supplied key (K) for the opening of the upper ring (R),
drill, sealant, screws, bolts and washers.
Screws
. Antal does not supply the anchoring screws needed to install the winch. The
length of the screws depends on the thickness of the deck. Use screws, washers and
bolts in stainless steel AISI 316. Pay attention to the type of screws required UNI 5931
DIN 912. To learn the screw diameter, see table of technical characteristics above.
INSTALLATION PROCEDURE
The installation of the XT winch
requires that you lift the drum. First
of all unscrew the upper ring (R) with
the provided key (K). Thus lift the
drum (D) to access the base (B) and
the skirt (S) of the winch.
Unscrew the 6 Screws (C) to remove
the base from the skirt (S), having
access to the anchoring holes on the
skirt.
1
K
R
D
B
S
C