Antaira Technologies - Industrial Ethernet Switches
LMP-0800G-24 Series User Manual V1.0
48
The below table describes the field of the terms and value descriptions of “Port Trunk”.
5.11 Port Mirroring
Enable or disable mirroring feature. When enabled, a copy of matched frames will be mirrored to
the destination port specified in the port mirroring interface.
Terms
Value Description
Port Mirror Mode
Enable Port Mirroring function by check the box
Go To Interface
Users can use the dropdown box to choose the
destination port as “Port to mirror on” feature
Monitor Direction
Users can select the monitor direction from the dropdown
box by “Tx”, “Rx”, or “Tx/Rx”.
Source Port
Users can decide any particular port as the source port(s)
will require port mirroring.
Click the
“Apply” button to save changes.
Terms
Value Description
Aggregation Group Type
Type “LACP” for dynamic trunking, and type “Static” for
static trunking.
Aggregation Group Member
Map ports to Trunk1 ~ Trunk 8.
Figure 5.58
– Port Mirroring Configuration Interface
Figure 5.59
– Port Mirroring Terms & Value Description
Figure 5.57
– Port Trunk Terms and Value Description
