Antaira Technologies - Industrial Ethernet Switches
LMP-0800G-24 Series User Manual V1.0
20
Terms
Value Description
Port No.
It shows each port status: Up for link active, and Down for link inactive.
Port Name
Users
can create or insert a value or label for each port’s identification. The
maximum length of Port Name is 32 characters and #, \
, ‘, “, ? are invalid.
Status
Enable or disable a port
Speed/Duplex
Users can set the bandwidth of each port as Auto-negotiation, gigabit full, gigabit
half, 100 full,100 half,10 full,10 half mode.
Flow Control
Support symmetric and asymmetric mode to avoid packet loss when congestion
occurred.
Click the
“Apply” button to save changes.
Click to undo any changes made locally and revert to previously saved values.
5.4 PoE (Power-over-Ethernet)
LMP-0800G-
24 series is one of Antaira’s industrial PoE+ gigabit managed switches that has eight
built-in IEEE802.3at complaint ports, and each PoE port can support PoE output power up to a
maximum of 30W per port. It is also backward compatible with IEEE 802.af to support any standard
PoE powered devices (PD).
5.4.1 PoE Configuration
Figure 5.16
– Port Configuration Description
Figure 5.17
– PoE Port Configuration Interface
