Antaira Technologies
– Enterprise Managed Media Converter
FCN-3112 Series User Manual V1.0
27
Application Example 2:
In this backbone scenario, suppose two stand-alone converters are used to extend the distance up to
80KM (depending on the models used). On the left-hand side, PC1 is the management PC that can
manage the “Converter 1” remotely via the TP port. PC2 and PC4 are in the same VLAN 110 and
should be able to communicate with each other. PC3 and PC5 are also in the same VLAN 220 and
should be able to communicate with each other. To allow management and data traffic to flow to and
from the c
onverter in this scenario, the following steps to configure “Converter 1” are suggested.
802.1Q VLAN Group
1. By default, VLAN mode is disabled. Make sure you enable VLAN mode before carrying on the
following steps.
2. Specify VID 110, 220, 330 in VLAN Group 0, 1, 2 respectively. Select TP and FX in VLAN
Group 0 and 1 and select TP and CPU in VLAN Group 2 (when CPU is selected as a
member, the VLAN becomes management VLAN.).
3.
Click “Apply” to make settings effective.
