Antaira Technologies
– Enterprise Managed Media Converter
FCN-3112 Series User Manual V1.0
15
(excluding framing bits) and have either an FCS error or an alignment error.
CRC Errors
View-only field that shows messages of CRC (cyclic redundancy check) data
errors.
Jabbers
View-only field that shows the number of packets that are longer than 1522 bytes
and have either an FCS error or an alignment error.
Drop Events
View-only field that shows the number of dropped events received on each port.
Pause Frames
View-only field that shows the number of pause frames received on each port.
3.4.5 SNMP Configuration
Select
“SNMP Configuration” from Module Setting menu, then the following screen appears.
Terms
Value Description
SNMP Ability
To enable or disable SNMP.
Trap Mode
To enable or disable trap mode. When enabled, a trap will be sent when
the following events occur:
Cold Start: When the media converter operates cold start, a trap
notice will be sent.
Power Down: When the media converter is powered down, a trap
notice will be sent.
Link Up: When TP or FX link is established, a trap notice will be
sent.
Link Down: When TP or FX link is disconnected, a trap notice will
be sent.
SNMP Trap IP
Address
Specify the IP address to which the trap will be sent.
Read
Community
Specify a username for SNMP login, up to 31 characters. This allows users
to read only.
Read_Write
Community
Specify a username for SNMP login, up to 31 characters. This allows users
to read and make some setting changes.
