Antaira Technologies
– Enterprise Managed Media Converter
FCN-3112 Series User Manual V1.0
11
3.4 Module Setting
Select Module Setting and then the following screen appears.
Figure 3.4
– IP Setting Information
Terms
Value Description
Network
Configuration
To enable or disable DHCP function and specify the desired IP address,
subnet mask, gateway, and description.
Password
Setting
Set up a new password for website access.
Port
Configuration
Specify ports’ speed, duplex mode, ingress rate limit and egress rate limit,
and enable or disable flow control function.
Traffic Statistics
Display traffic statistics information of this Media Converter.
SNMP
Configuration
To enable or disable SNMP and Trap function.
VLAN
Configuration
To enable or disable VLAN mode. If “enabled”, the user can further specify
ports’ VLAN Group and egress link type.
Q-in-Q
Configuration
To enable or disable Q-in-
Q. If “enabled”, the user can further specify tag
protocol identifier (TPID) and Q-in-Q direction.
TS 1000 Loop
Back
Run a loopback test.
3.4.1 Network Configuration
Select
“Network Configuration” from Module Setting menu, then the following screen
appears.
Terms
Value Description
DHCP Client
To enable or disable DHCP function. When “Enabled”, the IP address will
