EN
89
TROUBLESHOOTING
Problem
Cause
The dehumidifier will not start
The plug is not properly plugged into the power point.
The fuses have tripped.
The set target humidity has been reached, or the water
container is full. The water container is not properly inserted.
The air is not dehumidifying
properly.
The dehumidifier has not been working long enough.
The air flow to the dehumidifier is blocked by furniture or
curtains, etc.
The target humidity is set too high.
Doors, windows etc. have not been closed.
The room temperature is too low (lower than 5°C).
Something in the room is emitting moisture.
The dehumidifier is making a lot
of noise
The air filter is blocked.
The dehumidifier is tilted.
The surface is not horizontal.
Frost on the evaporator coils
This is quite normal. The dehumidifier defrosts automatically.
Water on the floor.
Leakage from the hose or connection.
A hose is not connected, but the rubber plug has not
been inserted.
ES, AS or P2 is shown in
the display.
These error and warning codes are described in the control
panel section.
Содержание 014957
Страница 3: ...1 3 1 5 4 2 2 4 2 1 3 6 5...
Страница 4: ...3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4 20cm 40 cm 20 cm 20 cm 20 cm 2 1...
Страница 5: ...6 5...
Страница 6: ...7...