Anritsu Site Master S330A, Руководство пользователя, Страница: 63 / 85

2 - 47
Chapter 2 Operation
Icon Symbol
Site Master is in Hold or Power Conservation
mode. To resume sweeping, press the
RUN/HOLD
key. After 10 minutes without a
key press, the Site Master will automatically
enter into its power conservation mode.
Site Master is in keypad lockout mode. To turn
off keypad lockout, use the
B3
soft key (page
2-19).
Lock fail indication. Check battery. (If Site
Master fails to lock with a fully charged bat-
tery, call your ANRITSU Service Center.)
Processor timeout failure. Symbol appears at
the frequency that causes an input RF overload;
it then disappears as the sweep continues past
that point.
When calibration is performed, the Site Master
stores the ambient temperature. If the tempera-
ture drifts outside the specified range, this indi-
cator will flash. A recalibration at the current
temperature is recommended.
Indicates the remaining charge on the battery.
The inner white rectangle grows longer as the
battery charge depletes.
Table 2-2.
LCD Symbols