manualshive.com logo in svg

Anritsu Site Master S330A, Руководство пользователя, Страница: 21 / 85

Поделиться
Скачать
Anritsu Site Master S330A Скачать руководство пользователя страница 21

q

Connect SHORT, Press ENTER

The Site Master then measures the calibration
“short” that you must attach to the end of the test
port or transmission line.

q

Connect LOAD, Press ENTER

The Site Master then measures the 50 ohm termina-
tion (load) that you must attach to the end of the
test port or transmission line.

NOTES:
The order of the “Open,” “Short,” and “Load” meas-
urements can be changed or the selection repeated
using the Up/Down Arrow Key.

The combined measurements of an open, a short,
and a known-impedance load normalizes the meas-
urement system, to account for uncertainties intro-
duced by measurement-system components (e.g.,
cables, connectors, etc.).

Up/Down
Arrow Key

Increments or decrements a parameter value.

Note:
At turn on, before any other keys are pressed, the
Up/Down Arrow Key may be used to adjust display
contrast.

2 - 5

Chapter 2 Operation

Содержание Site Master S330A






















































































Отзывы:

Нет отзывов