Anritsu Site Master S112, Руководство пользователя, Страница: 49 / 83

Step 14.
If M2 needs to be turned OFF, press the M2 soft key
on the Markers Menu. If M2 needs to be turned ON,
press the M2 soft key again. This will open the M2
parameter for entry. If needed, enter the desired nu-
merical value using the keypad or the Up/Down Ar-
row key (Figure 2-1, page 2-0). Press ENTER when
the data entry is complete.
Step 15.
Press the MAIN soft key to return to the Main Menu.
Adjusting a Limit
Step 16.
Press the
LIMIT
key (Figure 2-1, page 2-0) to call up
the Scale Menu.
Step 17.
If the Limit needs to be turned OFF, press the LIMIT
soft key on the Scale Menu. If the Limit needs to be
turned ON, press the LIMIT soft key again. This will
open the Limit parameter for entry. If needed, enter
the desired numerical value using the keypad or the
Up/Down Arrow key (Figure 2-1, page 2-0). Press
ENTER when the data entry is complete.
Step 18. If you wish to have an audible beep when the trace is
above the limit line, press the OPT soft key from the
Main Menu (page 2-8).
Step 19.
Press the B2 soft key from the Option Menu (page
2-17) to toggle the limit beep indicator
ON
.
Saving a Setup
Step 20.
Press the SAVE SETUP key (Figure 2-1, page 2-0).
2 - 33
Chapter 2 Operation