ArcSource Outdoor 24 MC Integral SmartWhite
6
Three slots in the fixture “U” holder serve for mounting on the non-flammable flat surface
Ensure that the structure to which you are attaching
the fixture is secure
Caution:
Overhead installation requires experience. Fixtures may cause severe injuries when crashing down! If you
have doubts concerning the safety of a possible installation, do not install the device and consult installation with
an expert.
Warning for wireless DMX version!
The fixture is supplied with the cap screwed on the antenna connector. This cap provides declared IP rating of the
fixture but when the cap is removed, the enclosed antenna must be installed on the fixture to keep declared IP
rating of the fixture!
There is a possibility to install the LED unit and the control unit separately. Four holes with diameter of 5.3mm in
the control unit are intended for mounting on a flat, non-flammable surface. The length of the connection cable
between the control unit and the LED unit should not exceed 20 m.
3.2 Top hat (Half top hat ) installation
Top hat
Half top hat
1.
Unscrew the four socket heads 6x10 (1) in the ArcSource Outdoor 24 MC housing and slide the top hat (2)
onto ArcSource outdoor 24 MC Integral.
2.
Secure it with four socket heads 6x10 through holes (3) in the top head.
