ArcSource Outdoor 24 MC Integral SmartWhite
15
Pr Edit --- Editing a program
. The fixture offers 3 freely editable programs (Prog.1-Prog.3) each up to 40 steps.
Every program step includes a fade time-the time taken by the step´s channel status to reach the desired level and
a step time-the total time occupied by the step in the program.
E.g. If “F.tim.“=5 second and “S.tim.“=20 second, effects will go to the desired position during 5 seconds and after
that they will stay in this position for 15 seconds before going to the next prog. step
1.
1. Use the UP/DOWN buttons to find “
Sta Alone
“ menu and press the ENTER button.
2.
Use the UP/DOWN buttons to select “
Pr Edit
“ menu and press the ENTER button.
3.
Use the UP/DOWN buttons to select a program you want to edit (Prog.1-Prog.3) and press ENTER button.
4.
Use the UP/DOWN buttons to select a desired program step ("Step 01" - "Step 40") and press ENTER
button.
5.
Use the UP/DOWN buttons to select a channel you want to edit and press the ENTER button.
List of editable items:
“Prg.En” -
a total number of program steps (value 1-40). This value should be set before start
programming (e.g. if you want to create program with 10 steps, set Prg.En=10).
“Warm W” –
warm white LEDs saturation
“Cool W“ – cool white LEDs saturation
“C Wheel“ - a virtual colour wheel
“Strobe“- a strobe, shutter
“Dimmer“- a dimmer
“Dimmer F” a fine dimmer
“F.tim.“- a fade time, (0-25.5) seconds
“S.tim.“ - step time, value (0-25.5) seconds
“COPY“. – this item duplicates the current prog. step to the next prog. step. The item “Prg En” is increased
automatically.
6.
Use the UP/DOWN buttons to set a DMX value of the channel and then press the ENTER button.
7.
Use the UP/DOWN buttons to select next channel and press the ENTER button.
8.
After having set all channels in the current program step, press the MODE button to go by one menu level
back and select another program step.
6.7 Special functions
rdM Low
---
RDM
Code
.This menu item shows the first part of the RDM identification code.
rdM High
---
RDM Code
. This menu item shows the second part of the RDM identification code.
LED type
---
LED colour variat
. This menu allows to set desired colour variant according to connected LED module.
RGBW
–
RGBW variant.
Sin. Col.
–
Single colour variant.
Smart W.
–
Smart white variant.
Note: The menu items and DMX chart will be changed according to set colour variant!
Wireless
---
Wireless state
.
This menu serves for reading of the state of wireless operation (only Wireless DMX).
Unlink
-
The item serves for unlinking the fixture from the transmitter (only Wireless DMX version)
IniBlink
---
Initial blink.
If this function is on, the fixture makes auto-calibration (each LED colour lit on 100% for
short time) after switching the fixture on.
